Product ID:ROLLATAO ADHESIVE
MSDS Date:06/24/1993
FSC:8040
NIIN:00N060504
MSDS Number: BXTXW

Emergency Phone: 800-645-3323

Info Phone: 516-621-2100

Cage: DAIGE

Telephone: 516-621-2100/800-645-3323

Cage: DAIGE

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NO HAZARDS KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL: REMOVE AT FRESH AIR. SKIN: IN CASE OF IRRIT, FLUSH
W/WATER. EYE: IMMED FLUSH EYES W/PLENTY OF WATER FOR AT LEAST 15
MINUTES. EYELIDS SHOULD BE HELD APART DURING IRRIGATION TO INSURE
WATER CONTA CT W/ENTIRE SURFACE OF EYES & LIDS. IF IRRIT PERSISTS
CALL MD. INGEST: CALL MD IMMEDIATELY.

Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT. USE WATER TO COOL FIRE-EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:WILL NOT BURN UNLESS WATER EVAPORATED.

Spill Release Procedures:LARGE QTYS: ENCLOSE WITH DIKING MATERIAL TO
PREVENT SEEPAGE INTO NATURAL BODIES OF WATER. SMALL QTYS: SOAK UP
W/ABSORBENT MATERIAL AND REMOVE TO A CHEMICAL DISPOSAL AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:APPROVED RESPIRATORY PROTETION REQUIRED IN
ABSENCE OF PROPER ENVIRONMENTAL CONTROL. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
ANSI DESIGN CRITERIA.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Appearance and Odor:WHITE W/MILD ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO, CO*2.

Waste Disposal Methods:RECOVER FREE LIQUID. ABSORB RESIDUE & DISPOSE OF
ACCORDING TO LOCAL, STATE & FEDERAL REQUIREMENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.